TRACDEK Roofing |
G.I Roofing |
Tracdek roofing system is designed, engineered and customized system made to suit the requirement of the client |
G.I roofing are not customized and engineered roof system and is available in standard length panels and is manually cut and installed at site as per site conditioned |
Maximum single sheet length is 12 meters for screw down Tracdek Hi-Rib systems and limitless length for standing seam SS-2000 systems |
Maximum single sheet length 3 meter |
100% water tight sheeting system as the sheet has well deigned side laps and fasteners that do not allow water seepage |
Leakage due to poor side lap design and non-standard fasteners |
Aesthetically better and can be ordered to any colour specification |
Standard colours and non-compatible colour coding |
Heat transfer is less as Bare Galvalume reflects light better and due to its alloy coating, absorbs less heat |
Heat transfer is high as it is an untreated GI surface |
Has the capacity to withstand high loads depending on the grade of material used |
Cannot withstand high loads as the grade of the sheet cannot always be determined |
1st maintenance min after 20 years, Non corrosive |
Corrosion ratio depends on the grade of material |
Roll formed profile systems with various profile available |
Press made |
Tensile strength of 550MPa |
Tensile strength is less |
Cut edges are covered with Galvalume alloy coating which protect sheet from corrosion |
Cut edges in the GI sheet are opened and prone to corrosion very fast |
After sale services are taken care of due to Organized sector |
No guarantee of after sale service by shop keeper |