A mezzanine is a level that is built in between floors in a building. Mezzanine Floors are structural floors that can be installed within buildings for increasing the floor space in most durable, economical, and efficient manner. Generally, Mezzanine is a Main Beam and Joist arrangement to support mezzanine deck and concrete slab. High strength steel member are used for fast and easy construction of our Mezzanine Floor Structure.

It is fully customised to an organisation's own specific needs, available in a wide range of floor surfaces and sizes to maximize and improve space in order to get the best use from the total volume of the premises. A mezzanine floor can cope with many different applications

Mezzanine is designed and manufactured as per customer specific requirement. Mezzanine installation can be done in following type of building like, warehouses, industrial buildings, production areas, Process Building, Car parking area, offices and retail buildings and many other uses.

Mezzanine can be designed for following loading / As per customer specific requirements :-

• Dead load – Finished surface weight + self- weight
• Live load – As per requirement
• Collateral load – false ceiling, HVAC ducting etc.
• Finished surface – RCC slab, grating , chequered plate and plywood
• Finished floor – tiles and carpet
• Staircase , Platform and catwalk

Advantages:-

• Fast Track Construction with minimum disruption
• low Cost
• Easily dismantled and moved to other locations and rebuilt.
• Heavy load bearing capacity
• Space Optimization
• Flexible Design option, can be used for many purpose and designed for future

Interarch Light is ideal for situations where speed, reliability and flexibility are critical in delivering a project. Every output is accurately formed, cut, punched, dimpled and individually labeled and ready for 'screw together' for assembly. The aesthetic look delivered as a result is ideal for farm houses & cottages.

• During monsoon it is advised to make sure that all gutters and down pipes is free from any sort of blockages.
• Eave gutters and valley gutters should be thoroughly cleaned with a mild detergent solution and soft nylon brush followed by a rinse of clean water.
• Sometimes due to humidity moisture might build up near roof/ cladding areas which may cause it to corrode. Thus it is necessary to avoid clogging of water or moisture.

GALVALUME sheet steels are made by a "continuous hot dip" process. Coils of cold rolled steel are welded end-to-end and processed continuously on the coating line at speeds up to 600 feet per minute. ;

The uncoiled sheet is first cleaned to remove rolling oils and mill dirt, and to reduce surface oxides so that the surface will accept the coating. These continuous sheets are first fed into a molten coating bath contained in an open top, brick-lined heated pot.

The sheet then passes around a roller submerged in the coating bath and exits the bath vertically, pulling out with it an envelope of the coating material. As it exits, the sheet proceeds through a pair of opposing air knives, which are positioned above the bath and equidistant from the surface of the sheet. Most modern production lines have a coating thickness gauge feed-back control, which automatically adjusts knife air pressure and position to ensure that a uniform coating is applied. Various finishing steps are carried out to complete the process, after which the sheet is wrapped around a reel into a coated steel coil.

We appreciate your dedication & significant efforts to promote high standards of competence & compliance for occupational health & safety.

This has contributed towards creating safety awareness among the employees in achieving the organization goal of Zero Accident.

M/s Interarch Building Products Pvt. Ltd. has been adjudged the safety conscious contractor working.

We hope you will continue to contribute in future.

Interarch Organized a Welders & Saw operator's team training on 03/06/15 at Pantnagar